[PDF&VCE] Quickly Pass 300-206 Test With Lead2pass New 300-206 Brain Dumps (101-120)

13 Oct

2016 October Cisco Official New Released 300-206 Dumps in Lead2pass.com!

100% Free Download! 100% Pass Guaranteed!

We offers the most current and best training materials of the 300-206 certification Q&A , Practice Software, Study Packs, Preparation Labs and Audio Training you are looking for. Our online certification training offers you quick and cost-efficient way to train and become a certified professional in IT industry.

Following questions and answers are all new published by Cisco Official Exam Center: http://www.lead2pass.com/300-206.html

Which two statements about zone-based firewalls are true? (Choose two.)

A.    More than one interface can be assigned to the same zone.
B.    Only one interface can be in a given zone.
C.    An interface can only be in one zone.
D.    An interface can be a member of multiple zones.
E.    Every device interface must be a member of a zone.

Answer: AC

An attacker has gained physical access to a password protected router. Which command will prevent access to the startup-config in NVRAM?

A.    no service password-recovery
B.    no service startup-config
C.    service password-encryption
D.    no confreg 0x2142

Answer: A

Which command tests authentication with SSH and shows a generated key?

A.    show key mypubkey rsa
B.    show crypto key mypubkey rsa
C.    show crypto key
D.    show key mypubkey

Answer: B

Which configuration keyword will configure SNMPv3 with authentication but no encryption?

A.    Auth
B.    Priv
C.    No auth
D.    Auth priv

Answer: A

In IOS routers, what configuration can ensure both prevention of ntp spoofing and accurate time ensured?

A.    ACL permitting udp 123 from ntp server
B.    ntp authentication
C.    multiple ntp servers
D.    local system clock

Answer: B

Which product can manage licenses, updates, and a single signature policy for 15 separate IPS appliances?

A.    Cisco Security Manager
B.    Cisco IPS Manager Express
C.    Cisco IPS Device Manager
D.    Cisco Adaptive Security Device Manager

Answer: A

Which three statements about private VLANs are true? (Choose three.)

A.    Isolated ports can talk to promiscuous and community ports.
B.    Promiscuous ports can talk to isolated and community ports.
C.    Private VLANs run over VLAN Trunking Protocol in client mode.
D.    Private VLANS run over VLAN Trunking Protocol in transparent mode.
E.    Community ports can talk to each other as well as the promiscuous port.
F.    Primary, secondary, and tertiary VLANs are required for private VLAN implementation.

Answer: BDE

When you set a Cisco IOS Router as an SSH server, which command specifies the RSA public key of the remote peer when you set the SSH server to perform RSA-based authentication?

A.    router(config-ssh-pubkey-user)#key
B.    router(conf-ssh-pubkey-user)#key-string
C.    router(config-ssh-pubkey)#key-string
D.    router(conf-ssh-pubkey-user)#key-string enable ssh

Answer: B

Enabling what security mechanism can prevent an attacker from gaining network topology information from CDP via a man-in-the-middle attack?

A.    MACsec
B.    Flex VPN
C.    Control Plane Protection
D.    Dynamic Arp Inspection

Answer: A

On an ASA running version 9.0, which command is used to nest objects in a pre-existing group?

A.    object-group
B.    network group-object
C.    object-group network
D.    group-object

Answer: D

Which ASA feature is used to keep track of suspected attackers who create connections to too many hosts or ports?

A.    complex threat detection
B.    scanning threat detection
C.    basic threat detection
D.    advanced threat detection

Answer: B

What is the default behavior of an access list on a Cisco ASA?

A.    It will permit or deny traffic based on the access list criteria.
B.    It will permit or deny all traffic on a specified interface.
C.    It will have no affect until applied to an interface, tunnel-group or other traffic flow.
D.    It will allow all traffic.

Answer: C

When configuring a new context on a Cisco ASA device, which command creates a domain for the context?

A.    domain config name
B.    domain-name
C.    changeto/domain name change
D.    domain context 2

Answer: B

Which statement describes the correct steps to enable Botnet Traffic Filtering on a Cisco ASA version 9.0 transparent-mode firewall with an active Botnet Traffic Filtering license?

A.    Enable DNS snooping, traffic classification, and actions.
B.    Botnet Traffic Filtering is not supported in transparent mode.
C.    Enable the use of the dynamic database, enable DNS snooping, traffic classification, and actions.
D.    Enable the use of dynamic database, enable traffic classification and actions.

Answer: C

Which Cisco switch technology prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast flood on a port?

A.    port security
B.    storm control
C.    dynamic ARP inspection
D.    BPDU guard
E.    root guard
F.    dot1x

Answer: B

You are a security engineer at a large multinational retailer. Your Chief Information Officer recently attended a security conference and has asked you to secure the network infrastructure from VLAN hopping.
Which statement describes how VLAN hopping can be avoided?

A.    There is no such thing as VLAN hopping because VLANs are completely isolated.
B.    VLAN hopping can be avoided by using IEEE 802.1X to dynamically assign the access VLAN to all endpoints and setting the default access VLAN to an unused VLAN ID.
C.    VLAN hopping is avoided by configuring the native (untagged) VLAN on both sides of an ISL trunk to an unused VLAN ID.
D.    VLAN hopping is avoided by configuring the native (untagged) VLAN on both sides of an IEEE 802.1Q trunk to an unused VLAN ID.

Answer: D

You are the administrator of a Cisco ASA 9.0 firewall and have been tasked with ensuring that the Firewall Admins Active Directory group has full access to the ASA configuration. The Firewall Operators Active Directory group should have a more limited level of access.
Which statement describes how to set these access levels?

A.    Use Cisco Directory Agent to configure the Firewall Admins group to have privilege level 15 access. Also configure the Firewall Operators group to have privilege level 6 access.
B.    Use TACACS+ for Authentication and Authorization into the Cisco ASA CLI, with ACS as the AAA server. Configure ACS CLI command authorization sets for the Firewall Operators group.
Configure level 15 access to be assigned to members of the Firewall Admins group.
C.    Use RADIUS for Authentication and Authorization into the Cisco ASA CLI, with ACS as the AAA server. Configure ACS CLI command authorization sets for the Firewall Operators group.
Configure level 15 access to be assigned to members of the Firewall Admins group.
D.    Active Directory Group membership cannot be used as a determining factor for accessing the Cisco ASA CLI.

Answer: B

A router is being enabled for SSH command line access.
The following steps have been taken:
– The vty ports have been configured with transport input SSH and login local.
– Local user accounts have been created.
– The enable password has been configured.
What additional step must be taken if users receive a ‘connection refused’ error when attempting to access the router via SSH?

A.    A RSA keypair must be generated on the router
B.    An access list permitting SSH inbound must be configured and applied to the vty ports
C.    An access list permitting SSH outbound must be configured and applied to the vty ports
D.    SSH v2.0 must be enabled on the router

Answer: A

Which two configurations are necessary to enable password-less SSH login to an IOS router? (Choose two.)

A.    Enter a copy of the administrator’s public key within the SSH key-chain
B.    Enter a copy of the administrator’s private key within the SSH key-chain
C.    Generate a 512-bit RSA key to enable SSH on the router
D.    Generate an RSA key of at least 768 bits to enable SSH on the router
E.    Generate a 512-bit ECDSA key to enable SSH on the router
F.    Generate a ECDSA key of at least 768 bits to enable SSH on the router

Answer: AD

Which two features does Cisco Security Manager provide? (Choose two.)

A.    Configuration and policy deployment before device discovery
B.    Health and performance monitoring
C.    Event management and alerting
D.    Command line menu for troubleshooting
E.    Ticketing management and tracking

Answer: BC

The strength of our 300-206 dumps is the constant update that we perform to keep abreast with the market trends and changes. Our 300-206 exam question is not only the best option for certification but also enhances your skill to an advance level.

300-206 new questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDWFY3cWxuWnJKQ28

2016 Cisco 300-206 exam dumps (All 223 Q&As) from Lead2pass:

http://www.lead2pass.com/300-206.html [100% Exam Pass Guaranteed]

Why Choose Lead2pass?

If you want to pass the exam successfully in first attempt you have to choose the best IT study material provider, in my opinion, Lead2pass is one of the best way to prepare for the exam.

Lead2pass Testking Pass4sure Actualtests Others
$99.99 $124.99 $125.99 $189 $29.99-$49.99
Real Questions
Error Correction
Printable PDF
Premium VCE
VCE Simulator
One Time Purchase
Instant Download
Unlimited Install
100% Pass Guarantee
100% Money Back