100% Pass 300-101 Exam By Training Lead2pass New VCE And PDF Dumps.v.2018-4-2.557q:
Which two types of authentication does EIGRP offer? (Choose two)
D. Plain text
The router uses two types of authentication:
Simple password authentication (also called plain text authentication)–Supported by Integrated System-Integrated System (IS-IS), Open Shortest Path First (OSPF), and Routing Information Protocol Version 2 (RIPv2) MD5 authentication–Supported by OSPF, RIPv2, BGP, and EIGRP
Refer to the exhibit. Based on the output, which option is the next hop to get to the 18.104.22.168/24 network?
Refer to the Exhibit. A network engineer has configured NTP on a Cisco router, but the time on the router is still incorrect. What is the reason for this problem?
A. The router is not syncing with the peer, even though the NTP request and response packets are being exchanged.
B. The router is not syncing with peer, and the NTP request and response packets are not being exchanged.
C. The router is syncing with the peer, and the NTP request and response packets are being exchanged.
D. The router is dropping all NTP packets.
Which technology uses the many-to-one method of mapping IP addresses?
A. static NAT
B. dynamic NAT
Overloading–Maps multiple unregistered IP addresses to a single registered IP address (many to one) using different ports. This method is also known as Port Address Translation (PAT). By using overloading, thousands of users can be connected to the Internet by using only one real global IP address
Which version MPLS?
A. all versions of NetFlow
B. NetFlow version 9
C. NetFlow version 8
D. NetFlow version 5
E. NetFlow version 8 and 9
What are two limitations when in use of NPTv6 for IPV6 vs IPV6 Address translation?
A. stateful address translation
B. a limit of 32 1-to-1 translations
C. lack of overloading functionality
D. identify all interfaces NAT inside or outside
E. 1-to-1 prefix rewrite
F. mismatched prefix allocations
Which two statements about NTP stratum are true? (Choose two )
A. Stratum 15 indicates a device that is not synchronized
B. Stratum 1 devices receive their time from a peer that is connected directly to an authoritative time source.
C. The highest stratum level a synchronized device can have is 16.
D. Stratum 2 devices receive their time from a peer that is connected directly to an authoritative time source
E. Stratum 0 devices are connected directly to an authoritative time source
F. Stratum 1 devices are connected directly to an authoritative time source
What is the result of the command ip flow-export destination 10.10.10.1 5858?
A. It configures the router to export cache flow information to IP 10.10.10.1 on port UDP/5858.
B. It configures the router to export cache flow information about flows with destination IP 10.10.10.1 and port UDP/5858.
C. It configures the router to receive cache flow information from IP 10.10.10.1 on port UDP/5858.
D. It configures the router to receive cache flow information about flows with destination IP 10.10.10.1 and port UDP/5858.
Which two options can you use to configure an EIGRP stub router? (Choose two)
eigrp stub [ [receive-only] || [connected] [static] [summary] [redistributed] ] The following options are available:
?Receive-only: router only accepts, but does not explicitly advertise, any routes. This option may not be used in combination with any other options. ?Connected: router advertises directly-connected networks ?Static: router advertises any configured static routes ?Summary: router advertises any configured summarized routes ?Redistributed: router advertises any routes learned from another protocol, such as OSPF The eigrp stub configuration need only be entered on the spoke routers. The hub routers determine that they are talking to a stub router by examining the TLV in the HELLO packet.
Which technology is required on an EVN trunk interface?
Refer to Exhibit. A network engineer is unable to make VRF lite EIGRP adjacency work.
There is nothing wrong with communication between R1 and R2.
What command will eliminate the issue when executed on both routers?
A. (config-router-af)#autonomous-system 100
C. (config-vrf)#route-target both 100:1
D. config-router-af)#network 22.214.171.124.0.0.0.31
Refer to the exhibit. You have correctly identified the inside and outside interfaces in the NAT configuration of this device. Which effect of this configuration is true?
A. dynamic NAT
B. static NAT
Which condition can cause unicast reverse path forwarding to fail?
A. split horizon
B. STP convergence
C. PortFast security violation
D. asymmetric routing
Refer to the following:
Which option is one of the effects entering this command on a Cisco IOS router, with no additional logging configuration?
A. Debug messages can be seen on the console by enabling “terminal monitor.”
B. Debug messages are logged only on active console connections.
C. A user that is connected via SSH sees level 7 messages
D. The router can experience high CPU utilization
Refer to exhibit. A user calls from another branch office with a request to establish a simple VPN tunel to test a new router’s tunneling capability.
Based on the configuration in the exhibit, which type of tunnel was configured?
B. IPsec site-to-site
300-101 dumps full version (PDF&VCE): https://www.lead2pass.com/300-101.html
Large amount of free 300-101 exam questions on Google Drive: https://drive.google.com/open?id=0B3Syig5i8gpDbHBiVVk1ZVhpOGc
You may also need:
300-115 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDM0pqaFJWUXVuM2M
300-135 exam dumps: https://drive.google.com/open?id=0B3Syig5i8gpDZmFQVlZDZnpLejA