Vendor: Microsoft
Exam Code: 70-680
Exam Name: TS: Windows 7, Configuring
Version: 14.79
QUESTION 391
You have a computer that runs Windows 7. The computer is a member of an Active Directory domain and has a shared printer. Users report that they can print to the shared printer, but they cannot delete their print jobs.
You need to ensure that users can delete their own print jobs.
What should you do?
A. Restart the Print Spooler service.
B. Stop sharing the local printer and then share it again.
C. Assign the Manage Documents permission to SYSTEM.
D. Assign the Manage Documents permission to CREATOR OWNER.
Answer: D
Explanation:
Manage Documents
The user can pause, resume, restart, cancel, and rearrange the order of documents submitted by all other users. The user cannot, however, send documents to the printer or control the status of the printer. By default, the Manage Documents permission is assigned to members of the Creator Owner group. When a user is assigned the Manage Documents permission, the user cannot access existing documents currently waiting to print. The permission will only apply to documents sent to the printer after the permission is assigned to the user.
QUESTION 392
You have two computers named Computer1 and Computer2 that run Windows 7. Computer1 has a dynamic disk.
You remove the disk from Computer1 and connect the disk to Computer2.
You need to ensure that you can open files on all hard disk drives connected to Computer2.
What should you do from the Disk Management snap-in?
A. Convert a disk.
B. Rescan the disks.
C. Import a foreign disk.
D. Attach a virtual hard disk (VHD).
Answer: B
Explanation:
Moving Disks to Another Computer
Before you move disks to another computer, you should use Disk Management to make sure the status of the volumes on the disks is Healthy. If the status is not Healthy, you should repair the volumes before you move the disks. To verify the volume status, check the Status column in the Disk Management console.
Your next step is to uninstall the disks you want to move. In the Computer Management Navigation pane (the left pane), open Device Manager. In the device list, double-click Disk Drives. Right-click each of the disks you want to uninstall in turn and then click Uninstall. In the Confirm Device Removal dialog box, click OK.
If the disks that you want to move are dynamic disks, right-click the disks that you want to move in Disk Management, and then click Remove Disk.
After you have removed dynamic disks, or if you are moving basic disks, you can disconnect the disk drives physically. If the disks are external, you can now unplug them from the computer. If they are internal, turn off the computer and then remove the disks.
If the disks are external, plug them into the destination computer. If the disks are internal, make sure the computer is turned off and then install the disks in that computer. Start the destination computer and follow the instructions on the Found New Hardware dialog box.
On the destination computer, open Disk Management, click Action, and then click Rescan Disks. Right-click any disk marked Foreign, click Import Foreign Disks, and then follow the on- screen
instructions.
http://technet.microsoft.com/en-us/library/cc753750.aspx
QUESTION 393
You need to identify the hardware failures that have occurred on your computer in the past six months.
What should you do?
A. Open Device Manager.
B. Open Reliability Monitor.
C. Create a User Defined Data Collector Set.
D. Create a new Event Trace Sessions Data Collector Set.
Answer: B
Explanation:
Reliability Monitor is an advanced tool that measures hardware and software problems and other changes to your computer. It provides a stability index that ranges from 1 (the least stable) to 10 (the most stable). You can use the index to help evaluate the reliability of your computer. Any change you make to your computer or problem that occurs on your computer affects the stability index.
The Reliability Monitor is intended for advanced computer users, such as software developers and network administrators.
Click to open Action Center.
Click Maintenance. Then, under Check for solutions to problem reports, click View reliability history.
In Reliability Monitor, you can:
Click any event on the graph to view its details.
Click Days or Weeks to view the stability index over a specific period of time. Click items in the Action column to view more information about each event. Click View all problem reports to view only the problems that have occurred on your computer. This view doesn’t include the other computer events that show up in Reliability Monitor, such as events about software installation.
QUESTION 394
You have a computer named Computer1 that runs Windows 7.
You need to configure Computer1 to support the collection of Windows system events from other computers.
Which command should you run?
A. Wecutil qc
B. Winrm quickconfig
C. Winrs /r:Computer1
D. Wmic /aggregate
Answer: A
Explanation:
Wecutil To configure a computer running Windows 7 to collect events, open an elevated command prompt and enter the following command to configure the Windows Event Collector service: wecutil qc{qc | quick-config}Configures the Windows Event Collector service to ensure a subscription can be created and sustained through reboots. This includes the following steps:
8. Enable the ForwardedEvents channel if it is disabled.
9. Set the Windows Event Collector service to delay start.
10. Start the Windows Event Collector service if it is not running.
QUESTION 395
You have a netbook computer that runs Windows 7. The computer has a single 30 GB partition that has 10 GB of free space.
You need to create a system image of the computer by using Windows Backup.
You must achieve this goal by using the minimum amount of time.
What should you do first?
A. Attach an external hard disk.
B. Attach an external DVD burner.
C. Convert the local hard disk to a GPT disk.
D. Create and attach a virtual hard drive (VHD).
Answer: A
Explanation:
Scheduling Backups with the Backup And Restore Console Windows 7 Backup uses shadow copies to take a snapshot of your files, allowing the backup to completely back up files even if they are open. Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. You can select the following types of backup destination:
An external hard driveExternal hard drives are more expensive to purchase than internal hard drives, although you need to balance this against the cost of fitting the internal drive. They can be removed and stored in a secure location. However, they are typically slower than internal hard drives and tend to be less reliable, mainly because they are by default formatted using FAT rather than NTFS. You cannot use an external hard drive for a System Image backup unless you convert its filing system to NTFS. Because it is easily removable, it is more likely that an external hard drive will be missing when a scheduled backup is required.
QUESTION 396
A company has client computers that run Windows 7.
You need to secure a virtual private network (VPN) connection on the client computers so that two-factor authentication is used. Which setting should you choose? (To answer, select the appropriate setting in the work area.)
Answer:
QUESTION 397
You have a portable computer that runs Windows 7. Windows Backup is configured to run every day at 15:00.
You need to prevent backups from automatically running when the computer is running on the battery.
What should you do?
A. From Backup and Restore, click Change settings.
B. From Task Scheduler, modify the Automatic Backup task.
C. From Power Options, modify the settings of the current power plan.
D. From the local computer policy, modify the power management settings.
Answer: B
Explanation:
To set power management options for a scheduled task
– Open Task Scheduler.
– Right-click the task for which you want to set power management options, and then click Properties.
– On the Settings tab, under Power Management, do one or more of the following:
– To conserve the battery power of your computer, select the Don’t start the task if the computer is running on batteries check box.
– To stop the task if the computer starts running on battery power, select the Stop the task if battery mode begins check box.
– To wake your computer from hibernation or standby to run a task, select the Wake the computer to run this task check box.
Task Scheduler
With Scheduled Tasks, you can schedule any script, program, or document to run at a time that is most convenient for you. Scheduled Tasks starts every time that you start Windows and runs in the background, and it starts each task that you schedule at the time that you specify when you create the task.
QUESTION 398
A company has client computers that run Windows 7.
You set up a virtual private network (VPN) infrastructure that uses a preshared key for authentication.
You need to create the VPN connection on the client computers.
Which setting should you choose?
(To answer, select the appropriate setting in the work area.)
Answer:
QUESTION 399
Note: This question is part of a series of questions that use the same set of answer choices. An answer choice may be correct for more than one question in the series.
A Remote Assistance session is established with a user’s computer that runs Windows 7 Enterprise.
You need to verify that a local file is encrypted with the Encrypting File System (EFS).
What should you use to accomplish this goal?
A. The Netsh command
B. The Folder Properties window
C. Device Manager
D. Share permissions
E. The Services Management console
F. The Group Policy Management console
G. The Icacls command
H. The User Account Control Settings Control Panel window
I. Local Users and Groups
Answer: B
Explanation:
Right-click the file or folder
Select Properties
Click the Advanced button under the Attributes section If Check the box next to “Encrypt contents to secure data” is checked, then the file is encrypted using EFS.
QUESTION 400
A user-installed Windows update for Windows 7 has caused an error in software that is critical to the user.
You need to find and uninstall the update to restore functionality to the software.
Which settings categories should you choose?
(To answer, select the appropriate settings in the work area.)
Answer:
If you want to pass Microsoft 70-680 exam successfully, donot missing to read latest lead2pass Microsoft 70-680 dumps.
If you can master all lead2pass questions you will able to pass 100% guaranteed.